GCE 384V 125A relay high voltage BMS with 3U box 3.5 inch display rs485 CAN communication for ESS
GCE HV-BMS technical parameters
| RBMS(master BMS) | 3U-125A |
| protecting method | MCCB+Contactor |
| Rated Current range | -125A~125A |
| Voltage range | 120V-400V |
| Current sampling accuracy | 1.0%FSR |
| Communication interface with PCS | RS485/CAN |
| Communication interface with BMU | CAN |
| Communication interface with SBMS | RS485/CAN |
| Communication with monitoring software/EMS | Ethernet |
| Support IAP upgrade | Yes |
| Support HMI display and parameter settings | Yes(Optional) |
| Insulation detection | Yes(Optional) |
| High voltage power module | Support DC start (optional) |
| Dry contact output (normally open) | Up to 3 |
| Maximum qty of BMUs | 13 |
| Power | 24VDC(18~28V) |
| Power consumption | ≤20W |
| Size (W*H*D)mm | 3U |
| (440*130*500) | |
| Way out | Back and front |
| Tap center | not support |
| net weight | 21kg |
More than 1200 customers from 80 countries are buying from GCE.
GCE high voltage BMS 3U products:
GCE high voltage BMS features:
| 1 | Advanced battery management system---The highly integrated battery management system can realize seamless monitoring. |
| 2 | Perfect self-checking and running status checking function, with HMI display screen, |
| 3 | Complete and reliable system control and protection strategies, comprehensively guarantee battery safety, and escort to extend the life of battery packs. |
| 4 | Modular design, configurable and expandable---multiple energy storage units can be |
| 5 | Abundant communication interfaces---multiple RS485, CAN, Ethernet, dry contact input |
| 6 | The communication interface protocol is flexible---the factory comes with the company's |
| 7 | The built-in large-capacity memory chip can store a large amount of key operating data, and an SD card can be added to realize battery historical data storage |
| 8 | Automatic circulation control and automatic parallel/offline control can easily realize the |
GCE high voltage BMS technical parameters:
| RBMS(master BMS) | 3U-125A |
| protecting method | MCCB+Contactor |
| Rated Current range | -125A~125A |
| Voltage range | 120V-400V |
| Current sampling accuracy | 1.0%FSR |
| Communication interface with PCS | RS485/CAN |
| Communication interface with BMU | CAN |
| Communication interface with SBMS | RS485/CAN |
| Communication with monitoring software/EMS | Ethernet |
| Support IAP upgrade | Yes |
| Support HMI display and parameter settings | Yes(Optional) |
| Insulation detection | Yes(Optional) |
| High voltage power module | Support DC start (optional) |
| Dry contact output (normally open) | Up to 3 |
| Maximum qty of BMUs | 13 |
| Power | 24VDC(18~28V) |
| Power consumption | ≤20W |
| Size (W*H*D)mm | 3U |
| (440*130*500) | |
| Way out | Back and front |
| Tap center | not support |
| net weight | 21kg |
