Hunan GCE Technology Co.,Ltd
jeffreyth@hngce.com
86-731-86187065
Product Details
Place of Origin: Hunan, China
Brand Name: GCE
Model Number: RBMS07S2-3-63A384V
Payment & Shipping Terms
Minimum Order Quantity: 1
Price: $659-694
|
Voltage Range:
|
0-384V
|
Max Current:
|
50A
|
Dimensions:
|
482*89*500mm
|
Net Weight:
|
~10Kg
|
Power Consumption:
|
≤15W
|
Current Accuracy:
|
1%FSR
|
Insulation Voltage:
|
2800VDC <1mA 1min
|
Protection Level:
|
IP20
|
Operating Temperature:
|
-20℃~60℃
|
Operating Humidity:
|
5%~75%RH
|
Communication Protocols:
|
Rs485, CAN, LAN, Dry Contact
|
Fan Voltage:
|
48V(17S-24S 12V)
|
Voltage Detection:
|
0-5V
|
Power Supply:
|
12V
|
Consumption:
|
<20mA
|
|
Voltage Range:
|
0-384V
|
|
Max Current:
|
50A
|
|
Dimensions:
|
482*89*500mm
|
|
Net Weight:
|
~10Kg
|
|
Power Consumption:
|
≤15W
|
|
Current Accuracy:
|
1%FSR
|
|
Insulation Voltage:
|
2800VDC <1mA 1min
|
|
Protection Level:
|
IP20
|
|
Operating Temperature:
|
-20℃~60℃
|
|
Operating Humidity:
|
5%~75%RH
|
|
Communication Protocols:
|
Rs485, CAN, LAN, Dry Contact
|
|
Fan Voltage:
|
48V(17S-24S 12V)
|
|
Voltage Detection:
|
0-5V
|
|
Power Supply:
|
12V
|
|
Consumption:
|
<20mA
|
384V 50Amp high voltage battery management system featuring a 2U standard 19-inch case design. Engineered for efficiency, stability, and reliability with dimensions: W482×H89×D500mm.
Supports multiple communication protocols including RS485, CAN, LAN, and dry contact interfaces.
Features 8 temperature sensors, fan voltage 48V (17S-24S 12V), voltage detection range 0-5V, 12V power supply with consumption less than 20mA, and CAN2.0 B communication.
18 Pin+20Pin wire with standard lengths of 600mm, 900mm, and 1200mm. Temperature sensor wire available in 600mm, 900mm, and 1200mm lengths. Fan wire: 600mm standard length.
Communication wire connects from master BMS to each BMU with cascade connection, with the last port designated for terminal resistance.
| No. | Name | Explain | Matters Needing Attention |
|---|---|---|---|
| 1 | B+ B- | Power port connected to battery side total positive and total negative | Plug-in terminal (GPS50AFP) |
| 2 | P+ P- | Power port connected to charging equipment (UPS) or DC bus | Plug-in terminal (GPS50AFP) |
| 3 | AC 220V | The municipal power supply signal input port must be taken from the UPS output side | When there is mains power, the BMS is turned on; when there is no mains power, the BMS is turned off (ensure that the BMS and the mains are turned on and off synchronously to save the self-consumption of the battery by the BMS) |
| 4 | ON OFF | On: the circuit breaker is on; Off: the circuit breaker is disconnected | When the handle of the circuit breaker is in the tripping state in the middle position, it needs to be turned to Off before it can be closed. |
| 5 | D1 D1 D2 D2 | Two dry contact output reserved | Prohibit charging, Prohibit charging Dry contact output |
| 6 | Start | DC start button: start RBMS system by taking power from the battery side. | The system is connected to the battery. After the circuit breaker is closed, press and wait for the light to light up, indicating that the system is powered on. |
| 7 | System | System status indicator | System normal: the green light is always on System alarm: the yellow light is always on Self test failure and protection status: the red light is always on Charging: the green light flashes Discharge: red light flashing Self checking: red and green flashing alternately Pre-charging: yellow flashing |
| 8 | 1 2 4 8 | ID allocation: when multiple RBMs are used in parallel, the ID is allocated by setting the dial switch. You must start with 1 | The dial switch has 4 bits in total and supports up to 15 RBMs Parallel machine 1 ON: ID+1 2 ON: ID+2 3 ON: ID+4 4 ON: ID+8 |
| 9 | LAN | RBMS host computer system software can be connected to PC through network cable | The network cable standard is CAT5 or above, and can be connected by cross line or straight line. The line sequence can be according to the standard tia-586A or tia-568B |
| 10 | T-CAN T-485 | Terminal matching resistance setting during can and 485 communication Setting Description: (120R), on is valid | For parallel application, only the last one needs to be set; Single machine should be used flexibly according to the site conditions (interference, communication distance, etc.) |
| 11 | COM1 COM2 | RBMs external communication port: In parallel application: communicate with SBMS In stand-alone application: communicate with UPS / PCS external equipment | The shielded twisted-pair cable harness must be used randomly. The cable sequence is defined in the cable harness label |
| 12 | GND 24V | For supplying power to SBMS | |
| 13 | BMU-OUT | Communication interface with BMU | communication with BMU level |
| 14 | RBMS cabinet ground point | Must be grounded, and the grounding resistance is less than 1Ω |
Hunan Group Control Energy Technology Co., Ltd. (GCE) is a high-tech company specializing in the research and development of BMS and lithium battery peripheral equipment. The high-performance intelligent lithium battery management system produced by our company adopts the international leading technology, which greatly improves the battery management efficiency and prolongs the service life of lithium battery. The advanced BMS control strategy avoids the difficulties and instability faced by most competitors for our BMS.
You can contact with Cara for quotation. Her WhatsApp & Skype: +8617321496453, Email: cara@hngce.com
Video
Video
Video
Video
Video
Video
Video
Video
Video
